SiteLite Mag Laser Boresighter


Site Lite SL-100 - The system also includes our Ballistic Targeting System software program to create a custom laser boresighting target for your specific rifle and ammo. Shotguns. Class iiia laser product, less than 5. 0mw power output. This will insure a good electrical path. To. 50 cal. It's guaranteed more accurate than any other boresighter.

That's why the us navy and usmc selected our boresighters, over all others, for their Aviation Unit weapons from 5. 56mm to the 20mm canon on the AH-1Z Cobra Attack Helicopter. Shotguns. And, an optional app is available for your iPad and iPhone for use in the field. Includes a free muley crazy dvd featuring a massive 255" Muley taken by SiteLite President Rich Langner.

SiteLite Mag Laser Boresighter - Laser class iiIA,. Troubleshooting: note: the battery cap threads & housing may develop an invisible oxidation over time, therefore, the threads may need to be buffed very lightly to remove the alumINUM OXIDATION. Check this, first, if the laser does not turn on properly. The sl-100 uses a red laser and has approximately 2 hours continous battery life.

The sl-100 includes all adapters to fit. 22 cal.

More information about Site Lite SL-100

Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance


Sportsman Supply Inc. 113088 - The magnetic base in the rifle level bridges the bolt raceway, allowing you to position your rifle perfectly level. The level-level-level works because the scope is leveled to your receiver, not to the top of a scope base. Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments.

Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. Misaligned crosshairs Rob you of accurate bullet placement, especially at long range, where it counts. The simplest, most accurate scope leveling system ever devised.

Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance - Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience. Don't believe it! an accurate rifle requires level crosshairs, and the level-level-level gives you the means to level your scope perfectly in only minutes. Level your scope as you mount it on your rifle.

Then level the scope, tighten the rings, and the job is done. Works with practically any bolt-action rifle, and is adaptable to other designs. Compact: small size allows for convenient storage and transport. Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs.

More information about Sportsman Supply Inc. 113088


Similar products



Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance


Battenfeld 181181 - Convenient: flat and round bottom compartments hold bottles, screws and parts. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level. Compact: small size allows for convenient storage and transport. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.

The vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance or gunsmithing, and works on several varieties of guns. Durable: non-marring, solvent-resistant polymer stands up to years of hard use. The rear base features two adjustable offset clamps to fit a wide range of buttstocks.

Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance - Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs. A central aluminum channel lets the user move individual components to the ideal position and each individual component adjusts for secure support. Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments.

Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks.

Tipton’s best gun vise is the best tool you can own for working on your guns.

More information about Battenfeld 181181


Similar products



Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance


Sportsman Supply Inc. 119050 - The barrel clamp level is attached to the guns barrel while the smaller reference level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. Features: - precision tool for scope reticle alignment factory calibrated reference level - maximize accuracy potential tunable barrel clamp level - CNC machined aluminum level housings protective storage case.

Includes: a magnetized Action Level and a non-magnetized Scope Turret Level. Compact: small size allows for convenient storage and transport. Convenient: flat and round bottom compartments hold bottles, screws and parts. A scope's reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact.

Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks. The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The scope is rotated until the reference level is aligned with the barrel clamp level and then simply secured in place.

Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance - The scope can be installed loosely and the reference level placed on top of the scopes turret cap. Cnc machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. The gun is then rotated until the reference level is aligned.

More information about Sportsman Supply Inc. 119050


Similar products



Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance


Wheeler 553556 - Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs. The fat wrench is a perfect complement to the Deluxe Gunsmithing Screwdriver Sets. Versatility: adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns. Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down.

Non-destructive: barrel Clamp Level features non-marring pads to ensure no damage is done at the contact points. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.

Convenient: flat and round bottom compartments hold bottles, screws and parts. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks. Together, they can ensure accurate tightening of most every screw on any gun in your collection.

Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance - Includes: a magnetized Action Level and a non-magnetized Scope Turret Level. Accuracy: each level has an integrated bubble level for precise measurement and the Reference Level has a magnetic bottom for added stability. Includes: 10 bits hex to square adapter, 7/64 hex, #10 flat blade, 3/32 hex, #32 flat blade, T20 torx, #11 flat blade, t15 torx and leupold specialty flat blade, 5/32 hex, ¼" socket and a convenient plastic storage case.

More information about Wheeler 553556


Similar products



4 Pack, Green - Caldwell 533117 Lead Shot Weight Bag


Sportsman Supply Inc. 533117 - Durable: non-marring, solvent-resistant polymer stands up to years of hard use. This set of caldwell standard Lead Sled Weight Bags are designed to be placed in the tray of your Lead Sled. This set comes with 4 of the standard sized Caldwell Lead Sled Weight Bags. The durable handles make toting your weight bags to the range a snap.

Designed to be placed in the shot tray of your Lead Sled. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Convenient: flat and round bottom compartments hold bottles, screws and parts. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.

4 Pack, Green - Caldwell 533117 Lead Shot Weight Bag - Includes: 10 bits hex to square adapter, #10 flat blade, 3/32 hex, 5/32 hex, t15 torx and leupold specialty flat blade, T20 torx, #11 flat blade, 7/64 hex, #32 flat blade, ¼" socket and a convenient plastic storage case. Comes with 4 standard Lead Sled Weight Bags. Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs.

Durable: precision machined aluminum with an anodized finish. Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%.

More information about Sportsman Supply Inc. 533117


Similar products



Medium Height 0.87 in - Vortex Optics Hunter 1-inch Riflescope Rings


Vortex Optics RING-M - Holds approximately 7 pounds of sand or 25 ponds of lead shot. Comes with 4 standard Lead Sled Weight Bags. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs. Includes: 10 bits hex to square adapter, #11 flat blade, #32 flat blade, t20 torx, 5/32 hex, 7/64 hex, #10 flat blade, 3/32 hex, t15 torx and leupold specialty flat blade, ¼" socket and a convenient plastic storage case.

Comes with 4 standard Lead Sled Weight Bags. These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Medium Height 0.87 in - Vortex Optics Hunter 1-inch Riflescope Rings - Sold two rings per package. Ease of use: apply, repeatable, windage screws and base screws, accurate torque settings to scope rings, guard screws, which aids in accuracy and decreases the opportunity for problems in the field. Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. 5. 5" x 10" x3".

More information about Vortex Optics RING-M


Similar products



Caldwell Lead Sled Solo Adjustable Recoil Reducing Rifle Shooting Rest for Outdoor Range - 101777


Battenfeld Technologies 101777 - Includes: 10 bits hex to square adapter, 7/64 hex, t15 torx and leupold specialty flat blade, 5/32 hex, #32 flat blade, T20 torx, #10 flat blade, #11 flat blade, 3/32 hex, ¼" socket and a convenient plastic storage case. Comes with 4 standard Lead Sled Weight Bags. A heavy duty spring, located between the frame members, helps eliminate recoil on non-magnum calibers and greatly reduces recoil on all calibers.

Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs. Includes: 2 calibrated machined aluminum level housings, 1 foam-molded storage case. The adjustable-height front cradle features a forend strap that easily secures your rifle onto the rest. Ease of use: l-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape.

Caldwell Lead Sled Solo Adjustable Recoil Reducing Rifle Shooting Rest for Outdoor Range - 101777 - Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Accuracy: each level has an integrated bubble level for precise measurement and the Reference Level has a magnetic bottom for added stability. Versatility: with a unique, offset frame this rest is designed to hold all rifles, including detachable magazine rifles.

The lead sled solo features a smooth pivoting elevations system that is controlled by a single knob, making adjustments onto target fast and precise. Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Holds approximately 7 pounds of sand or 25 ponds of lead shot.

More information about Battenfeld Technologies 101777


Similar products



MTM Site-in-Clean RestRed


MTM SNCR-30 - These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Sold two rings per package. Dimensions: weighs approximately 14 pounds and is 26 inches L x 18 inches W. Durable: precision machined aluminum with an anodized finish. Versatility: adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns. Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down.

MTM Site-in-Clean RestRed - 5. 5" x 10" x3". Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level. The rear fork of the Site-In-Clean Rest can be removed for fast shooting. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C".

Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.

More information about MTM SNCR-30


Similar products



Vortex Optics Torque Wrench Mounting Kit


Focus RAC-VT-CTW - Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects. 5. 5" x 10" x3". These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22.

0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength. Sold two rings per package. Dimensions: weighs approximately 14 pounds and is 26 inches L x 18 inches W.

Vortex Optics Torque Wrench Mounting Kit - Rest size: 11" x 20" x 4" when closed. Versatility: adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns. Non-destructive: barrel Clamp Level features non-marring pads to ensure no damage is done at the contact points. Accuracy: each level has an integrated bubble level for precise measurement and the Reference Level has a magnetic bottom for added stability.

Riflescope accessories Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments. Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. This tool is easy to operate, simple to set, and offers fast, accurate tension wherever and whenever you need it.

More information about Focus RAC-VT-CTW


Similar products



CTK Precision Gun Vise Attachment


CTK Precision GVA1 - Ease of use: adjustment knobs are conveniently placed to allow for easy adjustments that do not require removing the gun from the rest. 5. 5" x 10" x3". Soft, rubber padding on forks give a firm, over-molded, non-marring hold. Lightweight and packs down to fit anywhere; Use with or without rear butt-stock support.

. Includes: 10 bits hex to square adapter, #32 flat blade, #10 flat blade, t15 torx and leupold specialty flat blade, 7/64 hex, #11 flat blade, 3/32 hex, T20 torx, 5/32 hex, ¼" socket and a convenient plastic storage case. Comes with 4 standard Lead Sled Weight Bags. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level.

This tool is easy to operate, and offers fast, simple to set, accurate tension wherever and whenever you need it. The easy to read inch-pound increments ensure you tighten in 1in/lb increments to the specified torque, and not a bit more, ranging from 10 in/lbs to 50 in/lbs. Bits included in kit: 3/16" hex bit - fits vortex bobro mounts, cm-202 and cm-203, 2.

CTK Precision Gun Vise Attachment - 5mm hex bit - fits razor red dot, 3mm hex bit - Fits Hunter rings, T15 Torx bit - Fits Viper rings and Tactical rings. Bits included in kit: t25 torx bit - fits pmr rings, 10mm wide Screwdriver bit - Fits Hunter and Viper clamp bolt, 1/2" socket - Fits Tactical rings, 1/4" Socket adaptor. Converts the p3 ultimate Shooting Rest into a Gun Vise.

Adjusts to accommodate both rifles and pistols.

More information about CTK Precision GVA1


Similar products