TEKTON 46133 3/8-Inch I.D. by 6-Foot 300 PSI Hybrid Lead-In Air Hose with 1/4-Inch MPT Ends


Michigan Industrial Tools 46133 - Tekton 46133 3/8 inch x 6 foot hybrid air hose - 1/4" male npt ends outfitted with 1/4-inch NPT male ends, the TEKTON 6-Feet x 3/8-Inch I. D. Slides over rough surfaces without abrasion. 300 psi hybrid lead-in air hose is ideal for making flexible connections between supply lines, hose reels, and other system components.

Its flexibility prevents vibrations from moving parts from traveling through the system and loosening connections or causing leaks while solid brass 1/4-inch NPT male end connectors never corrode and seal better against leaking than aluminum, steel, or zinc. Made in the U. S. A. Features makes a flexible connection from rigid supply line to hose reel to isolate vibrations Stays flexible and easy to work with, steel, even in the cold Slides over rough surfaces without abrasion Lightweight, low friction hybrid polymer resists kinking and tangling Solid brass connectors never corrode and seal better than aluminum, or zinc Makes a flexible connection from rigid supply line to hose reel to isolate vibrations.

TEKTON 46133 3/8-Inch I.D. by 6-Foot 300 PSI Hybrid Lead-In Air Hose with 1/4-Inch MPT Ends - Stays flexible and easy to work with, even in the cold. Of an advanced hybrid polymer, abrasion-resistant, and flexible, the hose is lightweight, even in the cold. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Lightweight, low friction hybrid polymer resists kinking and tangling.

More information about Michigan Industrial Tools 46133

MaxWorks 80720 Auto Rewind Retractable Reel with 3/8" x 50' Air Hose with Brass Fittings


MaxWorks 80720 - Includes 3/8" diameter x 50' long rubber air hose with solid brass fittings. Our maxworks retractable air hose reel with 50' rubber air hose features a fully enclosed durable alloy steel spring that will provide years of service. 250 max psi holds up 50' of hose included. Can be mounted on your wall, floor or ceiling for versatility and convenience.

Precision machined full flow swivel solid brass fittings. Air outlet male: 1/4" x 3/8" NPT. Air inlet female: 3/8" x 1/4" NPT. Multi position ratchet release to easily roll up your retractable air hose. Maximum air pressure: 250 PSI; maximum air flow: 25 CFM. Four non-snag rollers help reduce hose wear. Auto rewind with four non-snag rollers to reduce hose wear.

More information about MaxWorks 80720


Similar products



ColorConnex Coupler & Plug Kit 14 Piece, Industrial Type D, 1/4 in. NPT, Red - A73458D


Legacy A73458D - Made from steel and aircraft aluminum. Auto rewind with four non-snag rollers to reduce hose wear. Industrial interchange - Type D in all red color. Maximum air pressure: 250 PSI; maximum air flow: 25 CFM. By using color to dedicate your different air lines, a lubricated line will never be used for a dry line application as long as your couplers and plugs match.

Color matching system - Easily connect plugs and couplers with same color. Air inlet female: 3/8" x 1/4" NPT. Includes 3/8" diameter x 50' long rubber air hose with solid brass fittings. Heavy duty applications - Use on professional jobsites, in automotive shops or at home in the garage. It also solves the problem of potential crossing and contaminating of different air lines.

ColorConnex Coupler & Plug Kit 14 Piece, Industrial Type D, 1/4 in. NPT, Red - A73458D - Air outlet male: 1/4" x 3/8" NPT. Premium materials - From the makers of Flexzilla. Dedicated line use - Ensures you never use a lubricated line for dry line applications, preventing cross contamination. The colorconnex patented color code system allows for easy color to color matching of couplers and plugs among standard pneumatic interchanges.

More information about Legacy A73458D


Similar products



TEKTON 46334 3/8-Inch I.D. by 10-Foot 250 PSI Rubber Lead-In Air Hose with 1/4-Inch MPT Ends


Michigan Industrial Tools 46334 - Maximum air pressure: 250 PSI; maximum air flow: 25 CFM. See technical Specs for more information. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. Made from steel and aircraft aluminum. Solid brass end connectors never corrode and seal better against leaking than aluminum, steel, or zinc.

Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Made in the USA. This is a 3/8" inside diameter hose with solid brass 1/4" Male NPT threaded ends on each side. Air outlet male: 1/4" x 3/8" NPT. Color matching system - Easily connect plugs and couplers with same color. Industrial interchange - Type D in all red color.

TEKTON 46334 3/8-Inch I.D. by 10-Foot 250 PSI Rubber Lead-In Air Hose with 1/4-Inch MPT Ends - Auto rewind with four non-snag rollers to reduce hose wear. This is a high quality rubber air hose that is made in the USA by Tekton. Heavy duty applications - Use on professional jobsites, in automotive shops or at home in the garage. Even in extreme cold, this hose stays flexible and prevents vibrations from moving parts from traveling through the system and loosening connections or causing leaks.

Includes 3/8" diameter x 50' long rubber air hose with solid brass fittings. This hose is perfect for connecting supply lines, compressors, hose reels, and other system components.

More information about Michigan Industrial Tools 46334


Similar products



TEKTON 46363 1/2-Inch I.D. by 6-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch MPT Ends


Michigan Industrial Tools 46363 - Flexible rubber stays soft and easy to work with even at -40 degrees F. X 1/2 in. Auto rewind with four non-snag rollers to reduce hose wear. Please wash your hands after use. Made from steel and aircraft aluminum. Heavy duty applications - Use on professional jobsites, in automotive shops or at home in the garage.

Maximum air pressure: 250 PSI; maximum air flow: 25 CFM. Flexible rubber stays soft and easy to work with even at -40 degrees F. Made in the USA. Industrial interchange - Type D in all red color. Outfitted with 1/2 in. Even in the deep cold, its flexibility prevents vibrations from moving parts from traveling through the system and loosening connections or causing leaks.

TEKTON 46363 1/2-Inch I.D. by 6-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch MPT Ends - Rubber lead-in air hose is ideal for connecting supply lines, compressors, hose reels, and other system components. Premium materials - From the makers of Flexzilla. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. California warning: this product contains chemicals, known to the State of California to cause cancer, including lead, birth defects or other reproductive harm.

Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Made in the USA.

More information about Michigan Industrial Tools 46363


Similar products



WYNNsky Steel Manual Air Hose Reel,Mounts horizontally and vertically, Basic Hand-Operated Air Compressor Hose Reel


WYNNsky - Flexible rubber stays soft and easy to work with even at -40 degrees F. The solid brass swivel ensures leak-free operation when working pressure does not exceed 300 psi. Made from steel and aircraft aluminum. Reel holds 100 feet of a 3/8 air hose hose not included. Auto rewind with four non-snag rollers to reduce hose wear.

Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Please click on the wynnsky link at the top of this page to see our other products from WYNNsky. Premium materials - From the makers of Flexzilla.

WYNNsky Steel Manual Air Hose Reel,Mounts horizontally and vertically, Basic Hand-Operated Air Compressor Hose Reel - Air outlet male: 1/4" x 3/8" NPT. Color matching system - Easily connect plugs and couplers with same color. Hose is not included. Flexible rubber stays soft and easy to work with even at -40 degrees F. The wynnskyth1028 can be mounted directly on pressure washers or compressors. Solid brass swivel prevents against leaks.

Industrial interchange - Type D in all red color. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F.

More information about WYNNsky


Similar products



Ironton Wall Mount Air Hose Reel - Holds 3x8in. x 100ft. Hose


Ironton - Premium materials - From the makers of Flexzilla. Flexible rubber stays soft and easy to work with even at -40 degrees F. Hand crank with spring loaded axle for essy winding. Air hose not included for use and storage. Reel holds 100 feet of a 3/8 air hose hose not included. 1/4in. Hand crank and spring-loaded axle.

3/8, max. Maximum air pressure: 250 PSI; maximum air flow: 25 CFM. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Hose not included 1/4in. Air outlet male: 1/4" x 3/8" NPT. X 100ft. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. X 100ft. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc.

Ironton Wall Mount Air Hose Reel - Holds 3x8in. x 100ft. Hose - Mounts horizontally and vertically. F brass fitting. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. X 100ft. Mounts horizontally and vertically.

More information about Ironton


Similar products



Air Coupler and Plug Kit, Quick Connect Air Fittings, 12 Piece 1/4" Industrial Solid Brass Quick Connect Set


WS TH1011 - Flexible rubber stays soft and easy to work with even at -40 degrees F. Description: this i/m style coupler kit includes a variety of couplers, plugs and fittings with a 1/4" basic flow size. Premium materials - From the makers of Flexzilla. Choose the wynnsky's products and you will never worry about overpaying or any after-sales service.

If you want to know more about our products, please search WYNNsky on Amazon. They are industrial level for heavy users who require top quality. Hose not included. Industrial interchange - Type D in all red color. Push connect easy connect system. Steel reel with powder-coat finish. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc.

Air Coupler and Plug Kit, Quick Connect Air Fittings, 12 Piece 1/4" Industrial Solid Brass Quick Connect Set - Auto rewind with four non-snag rollers to reduce hose wear. We deliver the most saving and best value to our customers. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Made from steel and aircraft aluminum. 1/4" npt air inlet, with max working pressure of 300 PSI. Attach this reel to a flat surface bench or wall with the built-in mounting plate for convenient use.

More information about WS TH1011


Similar products



Boeray 2pcs Brass Fitting, 90 Degree Barstock Street Elbow, 1/4" NPT Male Pipe to 1/4" NPT Female Pipe


Boeray - Made in the USA. Hose not included. Made from steel and aircraft aluminum. F brass fitting. 1/4in. Dedicated line use - Ensures you never use a lubricated line for dry line applications, preventing cross contamination. Made in the USA. Air inlet female: 3/8" x 1/4" NPT. Push connect easy connect system. X 100ft. Auto rewind with four non-snag rollers to reduce hose wear.

Premium materials - From the makers of Flexzilla. For use with lp and natural gas, refrigeration, and hydraulic applications. Steel reel with powder-coat finish. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. Heavy duty applications - Use on professional jobsites, in automotive shops or at home in the garage.

Boeray 2pcs Brass Fitting, 90 Degree Barstock Street Elbow, 1/4" NPT Male Pipe to 1/4" NPT Female Pipe - Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. 1/4" npt air inlet, with max working pressure of 300 PSI. Attach this reel to a flat surface bench or wall with the built-in mounting plate for convenient use. Solid brass swivel prevents against leaks. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

More information about Boeray


Similar products



Ironton Air Hose Reel - Holds 3/8in. x 100ft. Hose


Ironton - Spring tension brake limits reeling speed for safety. Interchangeable with most manufacturers. Color matching system - Easily connect plugs and couplers with same color. 300 max. Steel reel with powder-coat finish. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Made of heavy-duty 18-gauge steel with corrosion-resistant powder-coat finish.

Psi manual rewind spring tension brake limits reeling speed for safety Includes 3/8" diameter x 50' long rubber air hose with solid brass fittings. Made in the USA. Air inlet female: 3/8" x 1/4" NPT. Air outlet male: 1/4" x 3/8" NPT. Made in the USA. 100 psi. Sturdy ironton air Hose Reel holds up to 3/8in. Industrial interchange - Type D in all red color.

Ironton Air Hose Reel - Holds 3/8in. x 100ft. Hose - Heavy duty applications - Use on professional jobsites, in automotive shops or at home in the garage. Made from steel and aircraft aluminum. Hose not included. Premium materials - From the makers of Flexzilla.

More information about Ironton


Similar products



1/4" NPT, 14-Piece - ColorFit by Milton Coupler & Plug Kit - M-Style, Red


Milton Industries S-314MKIT - Auto rewind with four non-snag rollers to reduce hose wear. Interchangeable with most manufacturers. Adapts 1/4" npt male end to 1/4" tube size female end at a 90-degree angle. Hand crank with spring loaded axle for essy winding. By dedicating certain colors to different air lines, this will eliminate the risk of mixing a lubricated line with a dry air line which will prolong your applications and help to quickly finish any project.

Industrial interchange - Type D in all red color. All threaded connections are 1/4"" NPT. 1/4" basic body size with max pressure of 300psi. 1/4" npt air inlet, with max working pressure of 300 PSI. Attach this reel to a flat surface bench or wall with the built-in mounting plate for convenient use. Package contents: 6 male plugs 4 female plugs 2 male couplers 2 female couplers PUT COLOR TO USE IN YOUR SHOP: Easily match couplers to the right plugs using color, red to red- no more guessing.

1/4" NPT, 14-Piece - ColorFit by Milton Coupler & Plug Kit - M-Style, Red - Compatibility: colorfit m-style couplers and plugs are compatible with traditional Milton M-style couplers and plugs, competitor M-style couplers and plugs, and competitor red couplers and plugs. Each piece is coated with anodized Red aluminum and heavy-duty steel sleeves to prevent scratches or dulling of the coupler and plug after use.

Psi. F brass fitting.

More information about Milton Industries S-314MKIT


Similar products